Milestone M50 - Manual (Page 125)

Milestone Husky M30/M50 Administrator's Manual
www.milestonesys.com 125 Advanced configuration
Name Description
Send SMS if this event occurs
Only available if SMS notification (see "Configure SMS
notifications" on page 147) is enabled. Select if Milestone Husky
product should automatically send an SMS when the event occurs.
Recipients are defined as part of the SMS notification configuration.
When using SMS notifications, also bear in mind individual
cameras' scheduling.
Delete Delete a selected event.
Add
Add a new event. When the Generic Events node is selected,
clicking Add will add a new generic event. When a specific generic
event is selected, clicking Add will add a timer event (on page 113)
to the selected generic event.
Output control on event (Events and Output-specific properties)
When you add output controls on events (see "Configure hardware output on event" on page 113),
specify the following properties:
Name Description
Event Select the required event.
Output
Select the required output event.
Scheduling and archiving
About scheduling
The scheduling feature lets you specify:

When you want to archive (see "About archiving" on page 126)

That some cameras transfer video to Milestone Husky product at all times

That some cameras transfer video only within specific periods of time or when specific events
occur

When you want to receive notifications from the system
You can set up general scheduling properties for all your cameras or individual properties per camera.
You can set up when:

One or more cameras should be online (that is transfer video to Milestone Husky product)

One of more cameras should use speedup (that is use a higher than normal frame rate)

You want to receive any notifications (see "About notifications" on page 144) regarding one or
more cameras.

Archiving takes place.