Milestone M50 - Manual (Page 134)

Milestone Husky M30/M50 Administrator's Manual
www.milestonesys.com 134 Advanced configuration
Name Description
Maximum delay between
reconnect attempts
Control the aggressiveness of reconnection attempts. If Milestone
Husky product loses the connection to a camera, it will by default
attempt to re-establish the connection after ten seconds. In some
environments, for example if using vehicle-mounted cameras
through wireless connections, camera connections may frequently
be lost, and you may want to change the aggressiveness of such
reconnection attempts.
You can view live and even record video from a camera outside its online recording schedule. To do
this, you select the Start cameras on client requests and, if needed, the Enable recording when
started on client request options in the following when setting up your scheduling properties for the
camera in question.
Archiving
Milestone Husky product automatically archives (see "About archiving" on page 126) recordings if a
camera's database becomes full (in earlier versions, this was an option configured individually for each
camera).
Name Description
Archiving Times
Specify when you want Milestone Husky product to automatically
move recordings to your archiving path(s). You can specify up to 24
archiving times per day, with minimum one hour between each one.
Select the hour, minute and second values and click the up and
down buttons to increase or decrease values, or simply overwrite
the selected value, and then click Add. The more you expect to
record, the more often you should archive.
Send e-mail on archiving
failure
If selected, Milestone Husky product will automatically send an e-
mail to selected recipients if archiving fails. This requires that the e-
mail notification feature is enabled. Recipients are defined as part of
the e-mail notification properties (see "Email (Properties)" on page
144).
Send SMS on archiving failure
If selected, Milestone Husky product will automatically send an
SMS (mobile phone text message) to selected recipients if archiving
fails. This requires that the SMS notification feature is enabled.
Recipients are defined as part of the SMS notification properties
(see "SMS properties" on page 147).
Archive on event
If selected, Milestone Husky product starts archiving when a certain
event occurs. Select the event from the list.