Wireless device – Dwyer DLI User Manual
Page 90
90 |
P a g e
Wireless Device
Wireless: Wireless Configuration Dialog
The Wireless Configuration dialog allows the user to select from a variety of operating modes to
meet the requirements of different monitoring systems.
There are 2 ways To access this dialog
•
Device menu -> Identify Device and Read Status menu to open the "Device Status" window,
switch to the "Device Detail" tab, and click the "Wireless Configuration" button.
•
Device menu -> Start Device and click the "Wireless Configuration" button.
To edit the configuration, press the “Change” button in the dialog, make the appropriate changes,
then press the “Save” button to commit the changes to the device.
NOTE:Closing the dialog or exiting with the “OK” button will not store the changes in the device.
To comply with FCC regulations, saving a configuration change may cause the device to inhibit
output from the transmitter while the internal timers synchronize to the new configuration (this may
be the longer of the reading interval or custom transmit interval). To force synchronization of the
timers and enable output before the aforementioned interval has passed, restart the device from the
software.