Dwyer DLI User Manual
Page 35
35 |
P a g e
Communication Menu: Wireless Modem Setup
Select
Wireless Modem Setup from the Communication Menu to activate the following window:
This window allows the user to enter the RF Extender settings. The RF Extender allows the Dwyer
data logger to be remotely accessed up to one mile away from a computer. Not all data loggers are
capable of wireless remote operation.
Network
The Network (the host computer's network) Address and Module (the RF Extender ) are used to
distinguish the RF devices from other devices. The Network Address can be configured for up to 7
different networks (0-6). The Module Address can be configured for up to 65536 different addresses
(0-65535).
Communication
The Baud Rate parameter may need to be changed. Select the baud rate in the RF Extender
dropdown list from the drop down menu to match the baud rate of the data logger which will
communicate with the RF Extender. Keep the other default RF Extender settings unchanged if not
sure about them.
Send Command
Select the
Send Command button to use with the Command dropdown list.
Read Config
Select the
Read Config button to display the RF Extender's current configuration.