Dwyer DLI - Manual (Page 4)

4 | P a g e
Merchandise Authorization (RMA) number and return the product as instructed by customer service.
Dwyer will replace the battery and return the data logger promptly.
Hardware
Package Inspection
Verify that the data logger(s) was not damaged in transit by carefully unpacking all items in the
shipping carton and looking for obvious signs of physical damage. If the data logger is damaged,
repack it in its original container and contact Dwyer Customer Service (see Contact Information
section). Any damage noted upon receipt must be documented to file a claim against the carrier.
System Requirements
Dwyer Data Recording software requires an IBM or compatible PC with the following:
• Pentium or higher processor
• Windows 95/98/2000/XP/NT
• 128 MB RAM
• Color 800 X 600 monitor
• 30 MB free disk space
• 3.5" disk drive or CD-ROM
• Available 9 pin male serial (COM) port
NOTE: Although the software is designed to work with the Windows Operating Systems listed above, Dwyer cannot
guarantee operation on OS's no longer supported by Microsoft Support Life Cycle Policy
Software Installation
Installing from CD ROM
Insert the CD ROM labeled Dwyer Data Recording Software into the host computer's CD ROM
drive. From the Windows Start Menu, choose the Run command and type d:\autorun.exe into the
Open field and click OK, it will bring the installation menu window Dwyer CD Contents as shown
below.
If the host computer's CD ROM Drive is not the D: drive, use the correct letter for the instructions
above.