Dwyer DLI User Manual
Page 41
41 |
P a g e
To change the thermocouple type, select the
Change button. To commit the change, select Save to
store the thermocouple type in the device. After selecting the thermocouple type, the temperature
range for the chosen thermocouple is automatically displayed.
Engineering Units (Device/Software level)
The
Engineering Units command is only available when a data recorder with this feature is
connected to the host computer. Multiple engineering units can then be defined into multi-channel
recorders.
NOTE: If the software level engineering units does not have the record of device engineering unit, a new software
level record of device engineering unit with an unique unit ID will be created when
Identify Device and Read Status
are performed.
1. Device Units
The
Device Units tab contain the engineering unit(s) of the device connected to the host PC. The
Device Units Wizard button (1) will automatically edited the device's engineering units or it can be
done manually using the
Change device settings button (2). Save the changes into the device select
the
Save changes to device button (3).