Dwyer DLI - Manual (Page 53)

53 | P a g e
• Manual Stop (default option for logger operation)
The device will continue to record data until the memory is full, or until the device is stopped
manually using the Dwyer software.
• Stop on Date
The user can specify a time at which the device will stop taking readings to memory. A stop date can
be specified up to a year in advance.
Note: If the Wrap Around feature is activated a stop date will not be possible to set.
• Stop after Readings
The user can specify the number of readings the device will take. Any number of readings can be
specified up to the maximum number of readings supported by the device.
Note: If the Wrap Around feature is activated a stop date will not be possible to set.
Device ID
A Device ID may be entered in the space provided in any combination of six letters and/or numbers.
The Device ID is written to the device and will appear in graphs or reports when the device is read
later. Use it for identification of the device or personnel linked to the device, etc.