Dwyer DLI - Manual (Page 46)

46 | P a g e
Trigger Form 1:
with
sample count
Trigger Form 2:
without
sample count
To edit trigger values, click the Change button. The values can be typed in directly, or changed using
the slider control.
NOTE: The high and low triggers cannot be disabled simultaneously.
The values for the high or low trigger points can be set. Enable the high trigger to allow the
acquisition of data to begin if the point is greater than the high set point. Enable the low trigger to
allow the acquisition of data to begin if the trigger level is less than the low set point. The trigger
sample can be set up to count by;
1. Typing in their readings count number or
2. Select Fill Memory on First Trigger option to get the maximum reading counts on a single
event.
Trigger formats with two trigger mode options fall into two types: Window and Two Point.