Dwyer DLI - Manual (Page 47)

47 | P a g e
Trigger Form 3:
Window, the function
of this form is similar to
Trigger Form 1.
The values for the high or low trigger points can be enabled and set manually. Enabling the high
trigger allows the acquisition of data if the pressure level is greater than the start high point and be
stopped at the stop high point. Enabling the low trigger allows the acquisition of data if the pressure
level is less than the start low point and be stopped at the stop low point.
Trigger Form 4:
Two Point Mode
Two Point Mode allows for a High Trigger and Low Trigger. There will be two separate areas of
pressure that can enable a trigger.
• Device has three triggered channels