Dwyer DLI User Manual
Page 56
56 |
P a g e
Recording Parameters Tab
The
Recording Parameters tab allows for set up of the recording start and end time.
Start Method: Start Now or Delay Start
Select
Start Now to begin recording immediately or select Delay Start to delay the recording.
End Method: Manual or Select Time
There are two methods to end Real Time Recording, (1) manually and (2) automatically. To end Real
Time Recording manually select the
Done Recording button on the
Real Time Chart Recording
Toolbar. To end automatically choose select time from the
Real Time Setup screen.
Reading Rate
Select the
Reading Rate from the dropdown list. To setup the Real Time Recording rate click the
Start Recording button to start real time recording.