Dwyer DLI User Manual
Page 25
25 |
P a g e
Communications Timeout
This refers to the length of time the PC will wait for the response from the data logger. Setting the tab
closer to the left will decrease the amount of time the PC waits for a response, while setting the tab
further to the right will increase the length of time the PC will wait. This setting is used when the
user is has a device that takes a longer time to respond to the PC.
Display Tab
The
Display Preferences Tab sets display time and language settings.
Use 24 Hour Time Format
Check this box to use a 24-hour format. Leave it unchecked to use a 12-hour format.
Use UTC Standard Time
Check this box to use Universal Coordinated Time (UTC). Formerly known as Greenwich Mean
Time (GMT).
Use UTC Abbreviation Time
Check this box to display the time zone that is relative to UTC time. If both the
Use UTC Standard
Time box and Use UTC Abbreviation Time box are unchecked then the system time of the PC will
be displayed.
Select Display Language
Choose the language to be displayed on the software from the language drop down list. The software
toolbar command also offers the language choice.