Dwyer DLI User Manual
Page 33
33 |
P a g e
Engineering Units List
The
Engineering Units List tab will display all the customized engineering units. To Edit a record
highlight it. The information will be displayed in the
Edit Engineering Unit's Recorder Units section
.
NOTE: The Show all units checkbox defines the status of both Engineering Units List tab and Use Next Available
Unit ID dropdown list box. If checked, all available unit ID's will be displayed on both fields. The unit ID range is
0-255.
Standard Units List
The
Standard Units List tab will display all the available unit type(s) that can be used to make
customized engineering units.