The file menu – Dwyer DLI User Manual
Page 11
11 |
P a g e
1. Insert the male connector of the IFC110 interface cable into the female receptacle of the data
logger. Insert the RS232 connector into the Serial Port.
2. Insert the male connector of the IFC200 interface cable into the female receptacle of the data
logger. Insert the female USB connector into the USB.
NOTE: Most Dwyer data loggers can use both IFC110 and IFC200 interface cables, some do not. For interface cable
data logger clarification contact technical support (see
Contact Information
section).
The File Menu