Dwyer DLI User Manual
Page 65
65 |
P a g e
Device Menu: Alarm Settings
From the
Device Menu, choose Alarm Settings. This command is only available when a data logger
with this feature is connected.
This command allows the high and low temperature points to be set, also high and low warn
temperature points can be set if the device has this feature, a visual alarm (flashing LED, the RED
one indicates the exceed range of high and low alarm and the YELLOW one indicates the exceed
range of high and low alarm warn) will be triggered. If the device has the time delay feature, the time
delay can be set to trigger a visual alarm. These points should be set in the units indicated.
Without Alarm Delay
Without Alarm Warn