Badger Meter SRD/SRI Valve Positioners - Manual (Page 7)

SAFETY
INSTALLATION AND STARTUP OF THIS INSTRUMENT IS TO BE CARRIED OUT ONLY BY QUALIFIED PERSONNEL, FAMILIAR
WITH INSTALLATION AND STARTUP PROCEDURES AND OPERATION OF THIS PRODUCT!
The installation of this product must comply with all applicable federal, state, and local rules, regulations, and codes
Failure to read and follow these instructions can lead to misapplication or misuse of this product, resulting in personal injury
and damage to equipment
Accident Prevention
The connected instrument contains mechanically moving parts, such as the feedback lever, which could cause injuries The
operators have to be instructed accordingly
Electrical Safety
• This instrument satisfies the conditions for safety class III, overvoltage category I according to EN 61010-1 or IEC1010-1
• Any work on electrical parts must be done by qualified personnel if any supply is connected to the instrument The
instrument must be used for its designated purpose and connected in accordance with its connection diagram
• Locally applicable installation regulations for electrical equipment must be observed (for example, in the Federal Republic
of Germany DIN VDE 0100 or DIN VDE 0800)
• The instrument must be operated with safety extra low voltage SELV or SELV-E
• Safety precautions taken in the instrument may be rendered ineffective if the instrument is not operated in accordance
with these instructions
• Limitation of power supplies for fire protection must be observed due to EN 61010-1, appendix F or IEC 1010-1
UNPACKING & INSPECTION
Upon opening the shipping container, visually inspect the product and applicable accessories for any physical damage such
as scratches, loose or broken parts, or any other sign of damage that may have occurred during shipment
NOTE: N If damage is found, request an inspection by the carrier’s agent within 48 hours of delivery and file a claim with the
carrier A claim for equipment damage in transit is the sole responsibility of the purchaser
Page 7
Safety
August 2014 POS-UM-00009-EN-02