Badger Meter SRD/SRI Valve Positioners - Manual (Page 39)

Menu 3: Mode of Action of SRD and Additional Position Feedback
SRD Main Menu
1 Mounting
2 Autostart
3 Valve Action
3 Valve Action
3.1 SRD
3.2 Feedback
3.1 SRD
3.1.1 Direct
3.1.2 Reverse
3 Valve Action
3.1 SRD
3.2 Feedback
3.1 SRD
3.1.1 Direct
3.1.2 Reverse
M 1 2 3 4
½ - - ½ - M and LED 3 flash
Function of the positioner is set at:
It will set the mode of action of the positioner and the optionally present
feedback. Without the card “position feedback”, the menu item “Feedback”
is not displayed.
3.1 Select “SRD”:
¼ ¾ - - - M short flash, LED 1 long flash
- 1 - - - LED 1 lights up
3.1.1 “Normal” if increasing input signal is to initiate increasing output
signal.
- - - - 1 LED 4 lights up
3.1.2 “Reverse” if increasing input signal is to initiate decreasing output
signal.
3.2 Select “Feedback”: (if present)
¼ - ¾ - - M short flash, LED 2 long flash
- 1 - - - LED 1 lights up
3.2.1 “Normal” for increasing current with increasing valve position.
- - - - 1 LED 4 lights up
3.2.2 “Reverse” for decreasing current with increasing valve position.
Page 39
Startup
August 2014 POS-UM-00009-EN-02