SHIMPO FGV-XY-Series - Manual (Page 7)

-6-
3.2 Display
Unit Type
Measurement Value
Peak Mode Indicator
The default setting for the four digit display shows compression loads as a positive force and tension loads as a negative force. To
reverse these settings, showing compression loads as negative and tension loads as positive, see section 4.5 for setting f01.
3.2.2 Numeric Display
3.2.3 Display Indicators
LO BAT flashes when
the battery needs to be
charged. Plug in the sup-
plied AC adapter. BAT is displayed when
the battery is being
charged.
PEAK is displayed when the unit is in
Peak mode. The presence of " - " con-
fi rms negative Peak mode.
Newton Kilogram Gram
When displaying statistical data in memory mode, the following indictors are shown.
The polarity setting, f01, will determine which directional force is considered positive and negative. See section 4.5.
3.2.4 MAX/MIN Display
Maximum
(Positive)
3.2.1 LCD Sections
Max/Min
and are shown when the comparator is ON.
See section 5.5.5 for more information.
Comparator Indicator
The availability of kg or g, and lb or oz is determined by the gauge's capacity.
Ounce Pound
PWR is displayed 1 minute before the gauge auto-
matically powers off. OVR is displayed when the load has exceeded
the gauge's capacity by 20%.
Maximum
(Negative)
Minimum
(Positive)
Minimum
(Negative)