beautypg.com

Caution safety precautions caution, Do not apply side loads or torque to your fgv-xy, Avoid dropping your fgv-xy – SHIMPO FGV-XY-Series User Manual

Page 3: Measuring small loads, Operate your fgv-xy within 35~85% rh, Do not use your force gauge in, or around water

background image

Caution

Safety Precautions

Caution

•In or around water
•In direct sunlight
•In high humidity

Keep the AC adapter's plugs, and the

FGV-XY's power jack clean.

Do not use your FGV-XY in the following
conditions or environments:

Operate your FGV-XY
within 0~40

°

C (-32~104

°

F).

Dirt or corrosion may create a shock or fi re hazard.

Clean your FGV-XY with a damp cloth and a solution
of mild soap and water.

Do not use caustic or abrasive chemicals when
cleaning your FGV-XY.

Use of your FGV-XY outside this temperature range
may cause malfunctions or damage.

Do not press the buttons on the FGV-XY
with any objects other than your fi ngers.

Do not apply side loads or torque to your FGV-XY.

PEAK

PEAK

ZERO

ZERO

MEM

MEM

UNIT

UNIT

PEAK

PEAK

ZERO

ZERO

MEM

MEM

UNIT

UNIT

PEAK

PEAK

ZERO

ZERO

MEM

MEM

UNIT

UNIT

Your FGV-XY has an internal mechanism which helps prevent overloading
when the measured force is applied in line with the sensor shaft. Applying
a twisting, bending or perpendicular force to the shaft will result in
permanent damage, and inaccurate measurements.

To ensure consistent accuracy, it is recommended
that your FGV-XY be calibrated at a minimum of
once per year.

Contact your Shimpo dealer for information regarding
calibration.

Avoid dropping your FGV-XY.

Y o u r F G V - X Y i s n o t
designed to withstand
dynamic loads. A fall
of sufficient height can
permanently damage your
gauge.

PEAK

PEA

K

ZERO

ZE

RO

MEM

ME

M

UNIT

UN

IT

Do not use your force gauge in, or around water.

Your FGV-XY is not waterproof,
and is not designed for wet, or
excessivley humid locations.

PEAK

PEA

K

ZERO

ZER

O

MEM

MEM

UNIT

UNIT

Measuring small loads.

Turn off Tracking function be-
fore measuring small forces.
Refer to section "4.4. Tracking"
for more information.

PEAK

PEA

K

ZERO

ZER

O

MEM

MEM

UNIT

UN

IT

Operate your FGV-XY within 35~85% RH.

Use of your FGV-XY outside this humidity range
may cause malfunctions or damage.

•In excessively dusty or oily environments
•In caustic or corrosive environments
•In fl ammible or volitile environments

REVERSE

PEAKPEAK

UNITUNIT

ZEROZERO

POWER

POWER

MEMORY

MEMORY

FGV-10XY

10.00lb/5.000kg/50.00N

REVERSE

PEAKPEAK

UNITUNIT

ZEROZERO

POWER

POWER

MEMORY

MEMORY

FGV-10X

Y

10.00lb/5.000kg/50.00N