SHIMPO FGV-XY-Series - Manual (Page 2)

Only use the supplied AC adapter for
charging the FGV-XY.
Use of a third party AC adapter will void the unit's
warranty, and may cause circuit damage or fi re.
Plug in the AC adapter fi rmly.
Do not open, repair, or attempt to modify
your FGV-XY.
Do not attempt to power your AC adapter
with voltages other than 100-230V AC.
Do not operate the FGV-XY or
its AC adapter in wet conditions.
Unplug the AC adapter by grasping the
plugs, and not the cables.
Loose connections can cause a fi re or shock hazard.
Please contact your Shimpo dealer for information
regarding repairs and modifi cations.
Fire and shock hazards may occur if used improperly.
Shock hazards and malfunctions may occur.
Unnecessary tension on the power chord may
create a shock or fi re hazard.
Warning
Caution
Safety Precautions
Use appropriate safety equipment while
performing tests with the FGV-XY. Use of a broken, deformed, or damaged
attachment or gauge is prohibited.
Weighing large masses, performing break tests,
and other uses may necessitate special safety
equipment. Please contact your supervisor
for the necessary safety equipment and test
procedures.
Contact your Shimpo dealer for information
regarding replacement accessories, additional
accessories, and repair.
Loading the FGV-XY with a force greater than
its rated capacity can damage the gauge.
OVR is displayed when the
gauge is overloaded. Remove
the load immediately to avoid
damage. Any measurement
during the OVR condition is not
accurate.
Caution
Observe the following safety symbols throughout this manual.
Warning
Prohibited Actions
Important Instructions
Failure to follow the instructions in this manual may result in serious injury or death.