SHIMPO FGV-XY-Series - Manual (Page 25)

-24-
5.8.2 Clearing All Memory
1. While viewing the last memory point, press and hold ZERO.
2. The display will show "nonE".
3. All memory has now been cleared, which returns the unit to standard measurement mode.
Key operation Display
Turn power off
PEAK PEAK ZERO
MEM
UNIT
1. Hold down MEM
2. Press POWER
PEAK PEAK ZERO
MEM
UNIT
3. Release POWER
ZERO
(Push for 5 seconds or more)
No recorded data
Standard measuring mode
Memory block number
Memory data
5.8.3 No Recorded Data
The display will show "nonE" if switching to memory mode when there are no recorded memory points.
Standard Measuring Mode
5.9 USB Communication
5.9.3 Battery Life and USB
5.9.1 Features of ToriemonUSB
5.9.2 Download ToriemonUSB
The USB port allows you to connect your FGV-XY via the supplied USB cable to your PC. Our free software, ToriemonUSB, allows you to
capture data directly into Excel*.
ToriemonUSB allows you to capture measurement and memory data directly into Microsoft Excel.
ToriemonUSB is available for free at the following web address: http://www.shimpoinst.com/software.php
The manual is included with the software download, and is available separately.
Leaving the USB cable connected to the FGV-XY will drain the battery power at a faster rate. Only connect the gauge when taking data,
or use the AC adapater for power when accessing data frequently.
Release MEM after "CNT"
is displayed.
*Microsoft Excel is a registered trademark of Microsoft Corp.
1.
2.
MEMORY
MEMORY
MEMORY MEMORY
POWER
POWER
ZEROZERO