SHIMPO FGV-XY-Series - Manual (Page 12)

-11-
Key Operation
POWER Turns the FGV-XY ON and OFF
ZERO Tares the gauge in Standard mode. Clears a peak value in Peak mode.
PEAK Switches between Standard, Positive Peak, and Negative Peak mode.
UNIT Cycles between the available measurement units.
MEM Stores a value in memory, or starts recording values.
Operation Key Key Functions
Tracking
ON / OFF
PEAK+UNIT
POWER
Turn POWER off. Press PEAK and UNIT simultaneously and hold. Press and release POWER.
Release PEAK and UNIT after "SEt" or "oFF" is displayed.
Enter
Function Mode
ZERO +
POWER
Turn POWER off. Press ZERO and hold. Press and release POWER.
Release ZERO after "f01" is displayed.
While in Function Mode:
UNIT: Changes the current setting.
PEAK: Saves current setting, and advances to the next the function.
ZERO: Saves the current setting, and returns to Standard mode.
Reverse Display
UNIT +
POWER
Turn POWER off. Press UNIT and hold, then press and release POWER.
Release UNIT after the display has reversed.
Display Memory
Data
MEM +
POWER
Turn POWER off. Press MEM and hold, then press POWER.
Release MEM after the display shows memory data.
While in the Memory display:
UNIT: Cycles through the statistical data for the current memory block.
PEAK: Returns to Standard mode. ZERO: Deletes one memory block.
Hold ZERO to delete all memory data. MEM: Advances to the next memory block.
Comparator/
Memory Settings
PEAK +
POWER
Turn POWER off. Press PEAK and hold, then press POWER.
Release PEAK after the "HI" setting is displayed.
While in Comparator/Memory Settings:
UNIT: Selects HI/LO setting, advances digits, changes polarity, cycles memory modes.
PEAK: Cycles through HI, LO, MEM settings.
ZERO: Cycles through the digits in HI/LO settings.
MEM: Saves settings and returns to Standard mode.
5. Features and Operation
5.1 Overview of Operation
Basic Operations
Special Operations
Key Operation Display
Turn Power Off
PEAK ZERO ZERO
MEM MEM
UNIT
1. Hold down UNIT.
2. Press POWER.
PEAK ZERO ZERO
MEM MEM
UNIT
Release POWER.
If you have mounted your FGV-XY upside down, or are holding the unit upside down during measurement, the display may be reversed for
readablity.
4.6 Reversing the Display
Release UNIT after
t h e t h e T r a c k i n g
Mode status screen is
displayed in reverse.
Splash Screen
Standard Display
Standard Measuring Mode
Reversed Display
Reversed Display
Standard Display
1. 2.
Tracking Mode Status
Reversed Display
Standard Display
FGV
FGV
UNITUNIT POWER
POWER
UNITUNIT