SHIMPO FGV-XY-Series - Manual (Page 17)

-16-
Key Operation Display
Turn power off.
PEAK ZERO ZERO
MEM MEM
UNIT
1. Hold down PEAK.
2. Press POWER.
PEAK ZERO ZERO
MEM MEM
UNIT
Release POWER.
5.6.1 Setting the Memory Mode
Turn the POWER off.
Press PEAK and hold, then press and release POWER. The display will show the HI Comparator limit.
Press PEAK twice to display the current memory mode.
Press UNIT to cycle the Memory mode.
Press MEM to save and exit.
Splash Screen
PEAK
PEAK
Comparator HI limit setting
Comparator LO limit setting
PEAK
There are following items are found in the Comparator/Memory mode settings.
Item Display Content Default factory setting
Comparator HI limit setting HI Displays the current HI limit. 0
Comparator LO limit setting LO Displays the current LO limit. 0
Memory mode setting MEM Displays the current Memory mode. Std
MEM
Saves changes,
and exits to
Standard mode.
UNIT
UNIT
Single
memory
Continuous
memory
Standard
memory
Memory mode setting
Release PEAK after the
unit displays the HI
comparator setting.
2.
UNIT
1.
FGV
PEAKPEAK
POWER
POWER
PEAKPEAK
PEAKPEAK
PEAKPEAK
PEAKPEAK
MEMORY MEMORY
UNITUNIT
UNITUNIT UNITUNIT