MAGURA RADIAL 195 - Manual (Page 34)

34
accessories
BraKe pads:
Sinter 0722189 (1 set)
Carbon 0722223 (1 set)
recoMMendation:
Sinter pad
> For use in rain
> Sinter pads for "normal" use up to speeds of about 130 Km/h
> Dirty tracks with little grip
> Where good dosability is required Carbon pad
> With very good grip on the road
> High external temperatures
> High speeds over 130 km/h
We fundamentally recommend that corresponding brake discs are used for every type of pad
(sinter/carbon). If a brake disc is run in with for example the carbon pad and is then changed
to sinter, a loss in performance or also squealing can occur. The same is true in reverse.
BraKe tuBe (0722146)
This kit contains everything necessary for the exchange of the tube in the event of a damaged
tube or connection
> Banjo bolt, master cylinder
> Banjo bolt, brake caliper + valve
> Sealing rings
Always use only original MAGURA accessories! Components from other manufacturers, e.g. brake
levers, brake tubes, brake pads etc. are not tested by MAGURA and have thus not been approved!
No statements can be made about the quality and suitability. If parts are mounted which do not
originate from MAGURA, the guarantee for the brake system and
components will lose its validity. Painting of the brake calipers, as well as any additionally-
mounted accessories and components, which do not originate from MAGURA, can lead to total
failure of the brakes! Risk of accident!
radial superMoto BraKesysteM