MAGURA RADIAL 195 - Manual (Page 27)

27
uK
> Suzuki fork end – 2006:
0722306
> Brake disc:
0722305
The Suzuki mounting is simi-
lar to that of the KTM. No
side distance pieces are
required for the brake disc
if the original hub is used. For
tightening torques and
sequences see the KTM
mounting. Additionally the
set screw (90) must be
mounted on the inside.
> Husqvarna fork end – 2006:
0722313
> Brake disc:
0722156
The 2006 Husqvarna moun-
ting is similar to that of
theKTM. Side distance piece
sare required for the brake disc
if the original hub is used
(100). For tightening torques
and sequences see the KTM
mounting. Additio-nally the set
screw (90) must be mounted
on the inside.
husqVarna – 50 MM ForK
suzuKi rM-z 450 – 2006 Model
Tightening torque: (4 Nm). It is recommended that in connection with the MAGURA brake and
original hubs only brake discs with D=320 mm are used, since for smaller brake disc
diameters the spokes could touch the brake calliper.
Tightening torque: (4 Nm). It is recommended that in connection with the MAGURA brake andori-
ginal hubs only brake discs with D=320 mm are used, since for smaller brake disc diameters
the spokes could touch the brake calliper.
Continuation on next page >