MAGURA RADIAL 195 User Manual
Page 29
29
uK
MoUntinG the tUbes
The angle take-offs from the brake tube have the same angle. The tube is arranged somewhat
unsymmetrically. The end of the tube with the shorter distance to the protective hose should be
screwed to the brake caliper, the opposite, longer side to the master cylinder. However what is
important here are the actual conditions on the motorcycle. The tube can also be mounted the
other way round.
caUtion:
> Before mounting the brake tube to the master cylinder pull out the black stopper and unscrew
the yellow stopper on the brake caliper (thread plugs). The brake caliper is prefilled with
DOT5.1 brake fluid.
> Lay the pipeline so that it cannot buckle or become kinked when the springs are compressed.
> Select the tube take-off so that it cannot be damaged by the tyre or moving parts.
Tightening torque of banjo bolt (10): 25 Nm
Tightening torque of valve (20): 10 Nm