KROHNE CARGOMASTER - Manual (Page 67)

CARGOMASTER®5
67 - Operators Manual
3. Click on the “Replace sensor” button. You will then be asked to select
the sensor to replace, see screenshot below: Select by clicking on the
correct sensor and then click OK. In our example we have selected the
Upper sensor, which is in the 10-30PSI range.
Replace Sensor screenshot# 2: Select sensor position
4. The next window is called the “Sensor Change” window. Read the
information here carefully! (If you have selected the wrong sensor,
press Cancel to go back one step).
If you have a floppy with sensor data files, insert it into the floppy-
drive now.
When you have the correct sensor selected, click “Search for sensors”
to continue. See screenshot below:
Replace Sensor screenshot# 3: Search for sensors
5. In the next window, all sensor data files that are either in the database
or program directories on the harddrive and on the floppy are listed.
The next screenshot shows an example of this. In that screen shot we