KROHNE CARGOMASTER - Manual (Page 54)

CARGOMASTER®5
Operators Manual - 54
The Sum field
The Sum field will total weights and volumes within a group. The field will
also allow for certain inputs, like alarms on/off, density and more.
To enable/disable alarms/functions for the whole group quickly, 0 (zero) will
disable an alarm, whilst 1 (one) will enable it. You can also type the words ON
and OFF directly in the cells.
The sum field also shows averages for certain values, e.g. the actual density.
Sums and averages for the Scratch-groups are also available as PARTSUM,
see page 29.
Note: The calculation method for sum Temp and average Density can be altered from the
Misc- Preferences menu
Keyboard shortcuts for ValueTable
The shortcuts below are specific and valid for Valuetable only. Other shortcuts
are listed under Keyboard shortcuts on page 56.
Keys/ Key combinations Action
CTRL + G Go to row #
= Input repeat
SHIFT + PageUp / PageDown Cycle Layer Up/Down
Insert Insert tank or blank row in current table
Delete Delete tank or blank row from current table
Home Goes to start of row
End Goes to end of row
Shift+Enter Brings up the Tank Information window
TAB Jumps to Sum field
Application key
3
Opens the Unit selector button
Table 2 Valuetable specific keyboard shortcuts
Valuetable codes
Enter these codes in any cell inn the ValueTable to change the column values:
Code Function Code Function
LEV Level IGP Inert Gas Pressure
ULL Ullage MD Measured Density
VOL Volume MDO Measured Density On/Off
V% Volume percentage RT1 Reference Temperature 1
DNS Density RT2 Reference Temperature 2
WGT Weight EXP Expansion Coefficient
LRT Loadrate APT API Type
OD1 Operator density 1 API API
OD2 Operator density 2 HHV HiHi Volume Limit
TP Top Pressure HIV Hi Volume Limit
BP Bottom Pressure LOV Low Volume Limit
UP Upper Pressure HIT High Temperature Limit
MP Mid Pressure LOT Low Temperature Limit
TT Top Temperature HII High Inertgas Limit
3 The Applications key has this symbol: