KROHNE CARGOMASTER - Manual (Page 22)

CARGOMASTER®5
Operators Manual - 22
4. Reference
Groups
CARGOMASTER® sees any tank to be of a certain type. The native types are
Cargo, Ballast, Fuel/Lubrication, Temperature, Solids or Misc types. Tanks of
the same type can be grouped together. (Scratch Groups can be used to group
tanks of different types)
Groups are usually set up from the Loading menus (F2), but single tanks can
be added or removed from a group within the ValueTable also.
By organising tanks into groups one achieves common handling of densities,
alarm limits, grade sums and averages and sorted survey reports.
Group modes
Groups may be set in different modes. Each mode has a specific set of alarms
and limits.
Loading : A new group is automatically set in loading mode.
Loading mode enables typical alarm settings and levels
that apply for a loading situation. Suggested alarms are
HH Level, H Level, H Inert and Density Difference.
Discharge : Suggested alarms enabled for this mode are LoLo
Vol%, Lo Vol% and LO Inert.
Seagoing : Suggested alarms are Volume change (See note), high
and low temperatures and high and low inert pressures.
Set group to loading
Press F2 or select menu Group – Loading. Select the group you want to set to
Loading and click OK.
Set group to Discharge
Press Shift + F2 or select menu Group – Discharge. Select group and click OK.