KROHNE CARGOMASTER - Manual (Page 26)

CARGOMASTER®5
Operators Manual - 26
Calculations*:
Determines how the computer uses the Measured Density (MD). The choices
are
• Use Measured Density for both level and weight calculations.
• Use MD for level and OD for weight calculations or
• Use OD for both level and weight calculations.
* Only the first option is currently enabled. Subject to change without notice.
Alarm Settings
Accessed from Group - Loading (press F2 ) then select the Alarms tab. See
also Handle Alarms on page 30.
Enter the preferred values for the common alarms, and click the checkboxes to
enable/disable them. A grey field indicates a non-adjustable alarm.
The Other Alarms field indicates whether other alarms are enabled. The More
Alarms button will bring up the settings for Other alarms.
Tank alarms can also be adjusted and enabled/disabled from the Alarms layer
in the ValueTable.
Alarm limits for Line / Vapor can be adjusted from the Line and Vapor
dialogues (SHIFT-F4 and CTRL F4)
Zero adjustment
It is strongly recommended to zero adjust any pressure sensors prior to
loading. Please consult the chapter on
Zero adjustments on page 36, and
follow the instructions given there.