KROHNE OPTIBAR PC 5060 C EN - Manual (Page 84)

7
TECHNICAL DATA
84
OPTIBAR PC 5060 C
www.krohne.com 04/2014 - 4003437201 - MA OPTIBAR PC 5060 C R01 en
Flange connection acc. to DIN 2501 or ASME B16.5
Flange connection acc. to DIN 2501 or ASME B16.5
Figure 7-18: Dimensions - Flange
Dimension [mm] a b c d e f g
DN40 PN40 Form C 50 4 x Ø 18 18 3 88 110 150
DN50 PN40 Form C 50 4 x Ø 18 20 3 102 125 165
DN80 PN40 Form C 50 8 x Ø 18 24 3 138 180 200
2" Class 150lb RF 50 4 x Ø 19.1 19.1 3.2 91.9 120.7 152.4
3" Class 150lb RF 50 8 x Ø 19,1 23.9 3.2 127 152.4 190.5
Dimension [inch] a b c d e f g
DN40 PN40 Form C 1.97 4 x Ø 0.71 0.71 0.12 3.46 4.33 5.91
DN50 PN40 Form C 1.97 4 x Ø 0.71 0.79 0.12 4.02 4.92 6.50
DN80 PN40 Form C 1.97 8 x Ø 0.71 0.95 0.12 5.43 6.30 7.87
2" Class 150lb RF 1.97 4 x Ø 0.75 0.75 0.13 3.62 4.75 6
3" Class 150lb RF 1.97 8 x Ø 0.75 0.94 0.13 5 6 7.50
e
f
g
INFORMATION!
For the version with a temperature range up to 150 °C / 302 °F the measure of length increases
by 28 mm / 1.1".
INFORMATION!
For the version with "secondary process barrier" the measure of length increases by
17 mm / 0.67".
INFORMATION!
Other versions are available on request.
.book Page 84 Friday, May 2, 2014 12:49 PM