KROHNE OPTIBAR PC 5060 C EN - Manual (Page 41)

START-UP
5
41
OPTIBAR PC 5060 C
www.krohne.com 04/2014 - 4003437201 - MA OPTIBAR PC 5060 C R01 en
5.2 Keypad functions
The display and adjustment module is used for indication of measuring values, adjustment and
diagnosis.
The device is operated via the four keys of the display and adjustment module 2. The LC display
1 indicates the individual menu items. Approx. 60 minutes after the last pressing of a key, an
automatic reset in the indication of measuring values is triggered. Any values not confirmed with
[OK] will not be saved.
[OK]
• Move back to the menu overview
• Confirm selected menu
• Editing the parameters
• Store value
[Z]
• Change measured value
• Select list entry
• Select editing position
[+]
• Change value of the parameter
[ESC]
• Cancel entry
• Jump to next higher menu
INFORMATION!
The device can be configured either via the relevant fieldbus or the adjustment module.
1 LCD display
2 Function buttons
.book Page 41 Friday, May 2, 2014 12:49 PM