KROHNE OPTIBAR PC 5060 C EN - Manual (Page 45)

START-UP
5
45
OPTIBAR PC 5060 C
www.krohne.com 04/2014 - 4003437201 - MA OPTIBAR PC 5060 C R01 en
5.4.2 Display
5.4.3 Diagnosis
Menu language In this menu item you can set the desired language.
Factory settings: English
German, English, French, Spanish, Portuguese, Italian, Dutch, Russian, Turkish, Polish and Czech
Displayed value
1 and 2
In this menu item you can define how the measured value should be presented on the display.
The factory setting is "Linear percent".
"Level" Filling height or Process pressure (Adjustment
units), Percent, Scaled, Current output, Linear
percent, Meas. cell temp. and Electronics
temperature
"Process pressure" Process pressure, Percent, Scaled, Current
output, Linear percent, Meas. cell temp. and
Electronics temperature
Backlight A backlight on the display is available, which can be turned on or off in this menu. By default, this
function is disabled.
Off, On
Device status Status signals Check function, Out of Specification, Maintenance required, Failure
Peak value The respective minimum and maximum pressure values are stored in the device. Under "Peak
values", these values can be viewed or reset. In addition to the pressure, the minimum and maximum
values of the sensor cell and the electronics temperature is stored. These can be viewed or reset
here.
Peak value
"Process pressure"
Reset peak value
Peak value
"Meas. cell temp."
Reset peak value
Peak value
"Electronics temperature"
Reset peak value
Simulation In menu item "Simulation", measured values can be simulated via the current output. These are
issued as both analogue and digital (via HART
® ). The simulation is automatically cancelled 60
minutes after the last key stroke.
For applications
"Process pressure"
Process pressure, Percent, Current output, Linear percent, Meas.
cell temp. and Electronics temperature
For applications
"Level"
Filling height or Process pressure (Adjustment units), Percent,
Current output, Linear percent, Meas. cell temp. and Electronics
temperature
.book Page 45 Friday, May 2, 2014 12:49 PM