Technical data – KROHNE OPTIBAR PC 5060 C EN User Manual

Page 63

TECHNICAL DATA

OPTIBAR PC 5060 C

www.krohne.com

04/2014 - 4003437201 - MA OPTIBAR PC 5060 C R01 en

Connecting cable between

sensor and external

electronics housing for

IP 68 (25 bar) version

PE and PUR

Nameplate carrier on

connecting cable

PE hard

Connection cable for IP 68

(1 bar) version

Process connection

Thread

from G1/2 and 1/2-14 NPT (female)

Flanges

from DN 25 (DIN) / 1" (ASME)

Flanges with extension

from DN 25 (DIN) / 1" (ASME)

Other connections

ISO 2852 / DIN 32676, DIN 11851, Neumo BioConnect / BioControl, Varivent, DRD, SMS and

PMC

Tightening torques

Maximum tightening torques for the process connection

G1/2 and G3/4

30 Nm / 22 ft lb

G1 and M30 x 1.5

50 Nm / 37 ft lb

G1 for PASVE

100 Nm / 74 ft lb

G1 1/2

200 Nm / 147 ft lb

Maximum tightening torques for screws

PMC1 and PMC1 1/4

2 Nm / 1.5 ft lb

PMC1 1/2

5 Nm / 3.7 ft lb

Maximum tightening torques for NPT cable gland and conduit pipe

Plastic housing

10 Nm / 7.4 ft lb

Aluminium housing

50 Nm / 37 ft lb

Stainless steel housing

50 Nm / 37 ft lb

Electrical connections

Mechanical - Standard

Cable gland

M 20 x 1.5 mm

Cable diameter

5...9 mm / 0.20...0.35"

6...12 mm / 0.24...0.47"

10...14 mm / 0.39...0.55"

1/2 NPT cable entry

Blind plug: M 20 x 1.5 mm, 1/2-14 NPT

Closing cap: M 20 x 1.5 mm, 1/2-14 NPT

Connector option: M12 x 1, Harting HAN 7D,8D, 7/8" FF

Core cross-section

Solid wire with cords: 0.2 mm...2.5 mm

/ AWG 24...14

Cord with wire end sleeve: 0.2 mm...1.5 mm

/ AWG 24...16

Mechanical - IP 66 / IP 68 (1 bar)

Connection cable

Construction

Four wires, one pressure compensation capillary, one suspension strand, braid, metal foil

and casing

Core cross-section

0.5 mm

/ AWG 20

Wire resistance

< 0.036 Ω/m

Tensile strength

< 1200 N / 270 lbf

.book Page 63 Friday, May 2, 2014 12:49 PM