KROHNE OPTIBAR PC 5060 C EN - Manual (Page 47)

START-UP
5
47
OPTIBAR PC 5060 C
www.krohne.com 04/2014 - 4003437201 - MA OPTIBAR PC 5060 C R01 en
5.5 Reset
The reset function resets specific user entries. There are two reset functions available:
Delivery status Delivery status Delivery status Delivery status
Restore the default values at the time of delivery, including the order-specific settings. A false
signal suppression, user programmable linearization curve as well as the measured value
memory will be deleted.
Basic settings Basic settings Basic settings Basic settings
Reset the set data, including special parameters to the default values of the manufacturer. A
false signal suppression, user programmable linearization curve as well as the measured value
memory will be deleted.
The following menu items are affected during a reset
Menu item Parameter Default
Measurement loop name Sensor
Application No reset
Unit Adjustment units mbar (cell ≤ 400 mbar)
bar (cell ≥ 1 bar)
Temperature unit C°
Sensor mounting correction 0.00 bar
Adjustment Zero / Min.-adjustment 0.00 bar - 0.00%
Span / Max.-adjustment +URL in bar - 100%
Damping Integration time 0.0 seconds
Current output Current output mode Output characteristic 4...20 mA
Failure mode ≤ 3.6 mA
Current output variable Linear percent - Level
Current output, adjustment 0...100% = 4...20 mA
Current output min./max. Min. 3.8 mA
Max. 20.5 mA
Lock adjustment Unlock
Language English
Displayed value 1 Current output in %
Displayed value 2 Meas. cell temp. in °C
Backlight Off
Simulation Process pressure
PIN 0000
Scaling Scaling variable Volume in L
Scaling format 0% = 0 L / 100% = 0 L
HART ® mode Address 0
.book Page 47 Friday, May 2, 2014 12:49 PM