KROHNE OPTIBAR PC 5060 C EN - Manual (Page 59)

TECHNICAL DATA
7
59
OPTIBAR PC 5060 C
www.krohne.com 04/2014 - 4003437201 - MA OPTIBAR PC 5060 C R01 en
7.2 Technical data
INFORMATION!
•
The following data is provided for general applications. If you require data that is more
relevant to your specific application, please contact us or your local sales office.
• Additional information (certificates, special tools, software,...) and complete product
documentation can be downloaded free of charge from the website (Download Center).
Measuring system
Measuring principle Capacitive ceramic measuring cell
Application range • Process pressure measurement
• Level of liquids
Measuring range 25 mbar...100 bar / 0.73...1450.38 psi
Display and user interface Display and user interface Display and user interface Display and user interface
Display on signal
converter
• Dot-matrix display 45x27 mm / 1.77x1.06", illuminated
• Display turnable in 90° steps
• Digit size 13x7 mm / 0.51x0.27"
• Ambient temperatures below -20°C / -4°F may affect the readability of the display
Display function • Display of measured value or derived measured value such as filling height
• Warning and diagnostic information
• All parameters are accessible via the operating menu
Operating and display
languages
German, English, French, Spanish, Portuguese, Italian, Dutch, Russian, Turkish, Polish and
Czech
Operation Local operation via 4 push buttons on the display and adjustment module
Remote operation • PACTware TM , incl. Device Type Manager (DTM)
• HART ® Hand Held Communicator from Emerson Process
• AMS ® from Emerson Process
• PDM ® from Siemens
Integrated clock
Date format Day / Month / Year
Time format 12 hours / 24 hours
Time zone CET (Factory setting)
Rate deviation Maximum 10.5 minutes / year
Measuring accuracy
Process pressure Process pressure Process pressure Process pressure
Reference conditions
acc. to DIN 61298-1
• Ambient temperature (constant): +15...+25°C / +59...+77°F
• Relative humidity (constant): 45...75%
• Ambient pressure (constant): 860...1060 mbar / 12.5...15.4 psi
• Measuring accuracy according to IEC 61298-2 (terminal based)
• Curve characteristic: linear
• Vertical mounting position, measuring diaphragm pointing down
• Effect of mounting position < 0.2 mbar/20 Pa (0.003 psig)
• Deviation at current output due to strong, high-frequency electromagnetic fields within
the scope of EN 61326
.book Page 59 Friday, May 2, 2014 12:49 PM