KROHNE OPTIBAR PC 5060 C EN - Manual (Page 23)

INSTALLATION
3
23
OPTIBAR PC 5060 C
www.krohne.com 04/2014 - 4003437201 - MA OPTIBAR PC 5060 C R01 en
Devices with absolute pressure feature a dummy plug instead of a filter element.
3.10 Measurement setup for process pressure measurement
The following points should be observed in this application:
• The signal converter must be mounted above the measuring point.
Devices in IP69K version
Figure 3-6: Ventilation IP69K
Filter element
Figure 3-7: Measurement setup for measuring the process pressure of gases
1 Pressure transmitter
2 Shut-off valve
3 Tapping point
.book Page 23 Friday, May 2, 2014 12:49 PM