KROHNE OPTIFLEX 1100C EN - Manual (Page 47)

OPERATION
6
47
OPTIFLEX 1100 C
www.krohne.com 01/2012 - 4001721801 - HB OPTIFLEX 1100 R01 en
6.4.3 Protection of the device settings
The menu item PASSWORD (2.7.5) lets you change the supervisor menu password.
How to change the supervisor menu password
• After you enter the supervisor menu, press 6 × [ ], [>>>>] and 4 × [ ] to go to the menu item
PASSWORD (2.7.5).
• Enter the new 6-character password (Press the 4 buttons in any sequence).
• Enter the new 6-character password again.
i If the second entry is the same as the first, the device will go back to the sub-menu.If the
second entry is not the same as the first, the device will not go back to the sub menu. Press
^ to start the password sequence again and enter the new 6-character password 2 times.
• Press [^ ^ ^ ^] (Esc) to go back to the "STORE" screen.
• Press ] or [ ] to set the screen to STORE YES STORE YES STORE YES STORE YES and press [^ ^ ^ ^].
i The device will save the new password and go back to normal mode.
How to set the supervisor password to "on" or "off"
The supervisor password is set to "on" by default. If it is necessary to set this function to "off",
refer to
Function description on page 38, Table B. Supervisor menu, menu item PSWD YES/NO
(2.7.4).
INFORMATION!
Make a note of the password and keep it in a safe place. If you lose the password, please contact
your supplier.