KROHNE OPTIFLEX 1100C EN - Manual (Page 35)

START-UP
5
35
OPTIFLEX 1100 C
www.krohne.com 01/2012 - 4001721801 - HB OPTIFLEX 1100 R01 en
5.1 How to start the device
5.1.1 Start-up checklist
Check these points before you energize the device:
• Are all the wetted components (probe, process connection and gaskets) resistant to the
product in the tank?
• Does the information on the signal converter nameplate agree with the operating data?
• Did you correctly install the device on the tank?
• Do the electrical connections agree with the national electrical codes?
5.1.2 How to start the device
• Connect the converter to the power supply.
• Energize the converter.
i Devices with the LCD display option only: Devices with the LCD display option only: Devices with the LCD display option only: Devices with the LCD display option only: After 10 seconds the screen will display "Starting
up". After 20 seconds the screen will display the software version numbers. After 30
seconds the default screen will appear.
• The device will display readings.
i Measurements agree with specifications given in the customer order.
CAUTION!
If the manufacturer received data about the installation, the device will display readings
correctly. If not, go to sub-menu 1.0.0 QUICK SETUP in the configuration menu to select the
correct settings.