KROHNE OPTIFLEX 1100C EN - Manual (Page 32)

4
ELECTRICAL CONNECTIONS
32
OPTIFLEX 1100 C
www.krohne.com 01/2012 - 4001721801 - HB OPTIFLEX 1100 R01 en
4.4 How to attach the optional display unit to the device
If the device was supplied with a blind cover, you can attach a display unit or configuration tool to
do the quick setup procedure. Use the procedure that follows:
• Turn the cover counterclockwise with a strap wrench.
• Remove the cover.
• Remove the screw that attaches the safety cord to the blind cover. Use a TORX T10 wrench.
• Remove the safety cord from the blind cover.
Figure 4-7: How to open the terminal compartment cover
Figure 4-8: Remove the safety cord from the blind cover