KROHNE OPTIFLEX 1100C EN - Manual (Page 24)

3
INSTALLATION
24
OPTIFLEX 1100 C
www.krohne.com 01/2012 - 4001721801 - HB OPTIFLEX 1100 R01 en
• Measure the probe.
i Make sure that you include the length of the counterweight (m) minus the cable insertion
length (n).
• Mark the probe length necessary for your application on the cable.
• Cut the cable.
Adjust the probe length to the tank height
Figure 3-21: How to assemble the Ø4 mm / 0.15¨ single cable probe: part 2
L = Probe length (thread stop to the bottom of the counterweight
m = Counterweight length = 100 mm / 4¨
n = Cable insertion length = 36 mm / 1.4¨