beautypg.com

Installation, 3 how to assemble a single cable probe – KROHNE OPTIFLEX 1100C EN User Manual

Page 12

background image

3

INSTALLATION

12

OPTIFLEX 1100 C

www.krohne.com

01/2012 - 4001721801 - HB OPTIFLEX 1100 R01 en

3.1.3 How to assemble a single cable probe

• Measure the probe.

i

Make sure that you include the length of the counterweight (m) minus the cable insertion
length (n).

• Mark the probe length necessary for your application on the cable.
• Cut the cable.

Adjust the probe length to the tank height

Figure 3-3: How to assemble the Ø2 mm / 0.08¨ single cable probe: part 1

L = Probe length (thread stop to the bottom of the counterweight
m = Counterweight length = 100 mm / 4¨
n = Cable insertion length = 15 mm / 0.6¨

INFORMATION!
The single cable probe measures between the top of the counterweight and the thread stop on
the process connection.

See also other documents in the category KROHNE Equipment: