KROHNE OPTIFLEX 1100C EN - Manual (Page 25)

INSTALLATION
3
25
OPTIFLEX 1100 C
www.krohne.com 01/2012 - 4001721801 - HB OPTIFLEX 1100 R01 en
• Attach the counterweight.
• Attach the lock screws to the counterweight. Tighten with a 3 mm Allen wrench.
i The device is prepared for installation on the tank.
If you decreased the probe length, you must enter the new probe length in the device
configuration menu (NOTE: the device must have the LCD display option or the HMI service tool).
For more data, refer to
Quick Setup on page 44.
Attach the counterweight
Figure 3-22: How to assemble the Ø4 mm / 0.15¨ single cable probe: part 3
1 Single cable probe
2 Counterweight
3 4 HC M6×5 lock screws
CAUTION!
Make sure the cable is fully engaged in the probe counterweight.