KROHNE OPTIFLEX 1100C EN - Manual (Page 43)

OPERATION
6
43
OPTIFLEX 1100 C
www.krohne.com 01/2012 - 4001721801 - HB OPTIFLEX 1100 R01 en
2.6.1 HART ADDRESS Do not use this menu item. This
menu item is for approved
personnel only.
2.7.0 DISPLAY This sub-menu includes all the
display parameters and
password security parameters
for the supervisor menu.
2.7.1 LANGUAGE Data can be shown in any of the
languages stored in the device.
9 languages are
available: 1 English,
French German and
Italian; 2 English,
French, Spanish and
Portuguese; 3
English, Chinese
(Mandarin), Japanese
and Russian
If the device has
the LCD display
option, depends
on the customer
requirement
2.7.2 LENGTH UNIT The length unit shown in
normal mode.
m, cm, mm, in
(inches), ft (feet)
mm
2.7.3 CONV UNIT Conversion unit. The length,
volume or mass conversion unit
for the conversion table and
shown in normal mode.
kg, t, Ston, Lton, m,
cm, mm, in, ft, m3, L,
gal, ImpGal, ft3, bbl
kg
2.7.4 PSWD YES/NO If it is necessary to protect your
settings in the supervisor menu
with a password, set this menu
item to YES YES YES YES.
YES, NO YES
2.7.5 PASSWORD This changes the password for
the supervisor menu. Press the
buttons up to 6 times in any
order. This will be the new
password. To confirm the
change, enter the new
password a second time.
[>>>>], [^ ^ ^ ^], [ ],
[ ], [>>>>] and [^ ^ ^ ^]
2.7.6 CONTRAST The contrast control for the
display screen. You can select a
shade of grey between light
grey (level 20) and black (level
54).
min.-max: 20…54 36
2.8.0 CONV. TABLE Conversion table. Use these
menu items to set up or erase
conversion tables to show
length, volume or mass
measurement values in normal
mode.
2.8.1 INPUT TABLE The device uses the conversion
table to convert measurements
to volume and mass readings.
The readings are shown in
normal mode. Give the number
of entries on the table. Enter
the height and the related
volume / mass values.
max. 30 entries
(distance / volume or
mass)
0 entries
2.8.2 DELETE TABLE This menu item erases the data
in the conversion table.
YES, NO NO
2.9.0 CONFIG/RESET Use this sub-menu to save
settings, start the device again
or go back to the settings
before the last save.
2.9.1 SAVE This menu item is not available. YES, NO NO
2.9.2 RECALL This menu item is not available. YES, NO NO
Menu
No. Function Function description Selection list Default