KROHNE OPTIFLEX 1100C EN - Manual (Page 33)

ELECTRICAL CONNECTIONS
4
33
OPTIFLEX 1100 C
www.krohne.com 01/2012 - 4001721801 - HB OPTIFLEX 1100 R01 en
• Attach the safety cord to the display unit with a TORX T10 wrench.
• Attach the ribbon cable to the electronics block.
• Attach the cover.
• Turn the cover clockwise.
Figure 4-9: Attach the display unit to the electronics block
WARNING!
If you do not push the wires away from the cover thread when you attach display unit to the signal
converter, there is a risk of damage to the wires.
Figure 4-10: How to close the terminal compartment cover