KROHNE OPTIFLEX 1100C EN - Manual (Page 38)

6
OPERATION
38
OPTIFLEX 1100 C
www.krohne.com 01/2012 - 4001721801 - HB OPTIFLEX 1100 R01 en
6.3.2 Menu overview
6.3.3 Function description
1. Quick Setup
1.0.0 Quick Setup
2.0.0 Supervisor
2.1.0 Information Menus for supervisors. Password locked. For
more data about the supervisor menu
password, refer to Function description on page
38, menu item 2.7.5.
2.2.0 Tests
2.3.0 Basic Parameters
2.4.0 Output I
2.5.0 Application
2.6.0 Communication
2.7.0 Display
2.8.0 Conversion Table
2.9.0 Config/Reset
2.10.0 History
3.0.0 Service
- - Menus for factory calibration and qualified
service personnel only. Password locked.
4.0.0 Master
- - Menus for factory calibration and qualified
service personnel only. Password locked.
Menu
No. Step Function Function description Selection list Default
1.0.0 Quick Setup This menu gives a quick
set-up procedure
applicable to most
applications. The user
can give the probe type,
probe length, output
function, 4 mA setting
and 20 mA setting. The
tank height is set
automatically to the
same value as the probe
length at the end of the
procedure.
1 Setting summary Device settings used at
this time. Read only.
2 QUICK SETUP? This tells the device
whether or not to
continue to the Quick
Setup procedure.
Yes [>>>>], No [ ]
3 PROBE TYPE Make a selection from
the available probe
types.
Single cable, Coaxial