KROHNE Summit 8800 Vol 1 - Manual (Page 98)

98 www.krohne.com 08/2013 - MA SUMMIT 8800 Vol1 R02 en
SUMMIT 8800 CONFIGURATION SOFTWARE 10
10 .3 Main functions of the configurator
Start the configurator (the configuration software) with an administrator account to get full ac-
cess to all settings.
Figure 115 Menu Configurator software
Edit Offline
This function allows the user to create a new configuration without actually being connected to
the flow computer. This function will be described in detail in volume 2 and 3 of this handbook.
Connect
With this option the configurator can connect to a running flow computer to do on-line functions:
• Uploaded and download software and to change configuration
• Access data from the computer
For details, see next section.
Load Set-up
This function allows the user to read a configuration from a disk of the PC.
Read Data from SD Card
This allows the user to read data from a SD card configured for use with the flow computer. The
card can be inserted into a card reader connected to a PC running the configuration software
and having administration rights.
Alternatively it is possible to read the SD card installed in the SUMMIT 8800 when connected to
it.
Settings
Change the font of the configurator software, select the engineering units (USC or Metric) for a
user, create new users and configure user access levels. See previous section.
Help
Comprehensive help menu
About