KROHNE Summit 8800 Vol 1 - Manual (Page 71)

71 www.krohne.com
08/2013 - MA SUMMIT 8800 Vol1 R02 en
SUMMIT 8800 FIELD DEVICE CONNECTION 06
71 www.krohne.com
08/2013 - MA SUMMIT 8800 Vol1 R02 en
SUMMIT 8800 OPERATION 07
7 .2 .2 Navigator
The rotary control Navigator operates in two ways, firstly as a continuously variable 360 degree
dial that step through each of the possible parameters on a display page highlighting each but-
ton in turn with red indicators on the sides. To use the rotary control, rotate either clockwise
or counter clockwise until the desired item is highlighted or shown with the red indicators. To
select or operate the selected control, press the rotary control until it clicks. The selected item
will then be highlighted or shown with green indicators as shown below.
Figure 73 Parameter highlighted by Navigator
Figure 74 Parameter selected by Navigator
7 .2 .3 Navigation Controls Main Menu
The main menu can be selected by pressing the Main Menu button which is available on every
screen in the bottom left hand corner of the display.
The menu items will appear as a list on the right hand side of the display screen Navigation con-
trols at the top of the list and at the bottom allow access to all items in the menu.
If a menu item or sub-menu is selected and has more than one page, then page navigation con-
trols will appear at the bottom of the screen as shown below.
The indicator shows the current page number and how many pages are within that menu item.
The arrow keys give access to the first page, last page and allow the numbers to be incremented
or decremented.
Figure 75 Screen navigation and control indicators
7 .2 .4 Main Menu Display
The main operating menu of the SUMMIT 8800 can be accessed by selecting the Main Menu But-