KROHNE Summit 8800 Vol 1 - Manual (Page 78)

78 www.krohne.com 08/2013 - MA SUMMIT 8800 Vol1 R02 en
SUMMIT 8800 FIELD DEVICE CONNECTION 06
78 www.krohne.com 08/2013 - MA SUMMIT 8800 Vol1 R02 en
SUMMIT 8800 OPERATION 07
Figure 84 Supervisory screen display
7 .2 .4 .6 Supervisor Mode
The Supervisor Mode is an advanced Edit Mode feature - it allows the user to log into the flow
computer, once logged in the user has open access to all display pages and permission to alter
any preset data or operate any function buttons or commands without having to login for every
operation.
When the Supervisor Mode is first entered the user will be prompted to enter a previously
entered alpha numeric Password of at least 5 characters. If the password is correctly entered
a system message of Supervisor Mode “enabled” is displayed which must be acknowledged, a
Supervisor Mode Icon will be shown in the top edge of the display. See figure below.
Depending on the initial configuration of the Supervisor Mode, the user can opt to either commit
any data changes instantly as they occur or commit any data changes via a single sub menu item
option with an acknowledgement.
Depending upon the initial configuration of the Supervisor mode Logout can be set to occur
automatically after a user defined time in minutes of no keyboard activity, or upon command of
a sub menu button under the Supervisor mode main menu item.
Figure 85 Supervisory Mode Enabled