KROHNE Summit 8800 Vol 1 - Manual (Page 97)

97 www.krohne.com
08/2013 - MA SUMMIT 8800 Vol1 R02 en
SUMMIT 8800 CONFIGURATION SOFTWARE 10
10 .2 USB Driver installation
For communication between the Configurator and the Summit via the USB port, a driver must be
installed. Here the standard procedure to do so:
Power on the SUMMIT 8800 flow computer – by supplying the 24VDC to the PSU input connector
Figure 112 24V input power
Ensure that the current user has Windows administrator privileges and has Windows permis-
sions to install drivers.
Connect an A to B USB cable between the SUMMIT 8800 flow computer and the PC or laptop.
Figure 113 USB port
When connecting the Summit to a PC loaded with a configurator, the correct USB Driver should
automatically be loaded, resulting in a message shown in Figure 105. Now the configurator can
be used to communicate with connected SUMMIT 8800.
Figure 114 Driver recognition message
If the driver is not automatically found, it can be loaded manually from :
C:\Krohne\Summit 8800 Configuration\USB Driver