KROHNE Summit 8800 Vol 1 - Manual (Page 139)

139 www.krohne.com
08/2013 - MA SUMMIT 8800 Vol1 R02 en
SUMMIT 8800 APPENDIX 3: TECHNICAL DATA 15
15 .4 .2 Replacement Parts
The following user replacement parts are available for service/maintenance:
Part No. Item Description
8800-300 Display and MPU board Main display, MPU, memory & USB Interface.
8800-301 Cage incl. PSU and Aux Housing, display, power supply and aux board
8800-302 PSU Board Power supply for complete Unit.
8800-303 Aux. Board Mode switch, SD Card and battery backup.
8800-304 Digital I/O board 1 Board without mA analog inputs
8800-305 Single Ethernet board Board with 3x serial ports and 1x ethernet port.
8800-306 Analogue I/O board Board including analog inputs
8800-307 Switch I/O board Board with only digital I/O e.g. for valve switching
8800-308 Dual Ethernet board Board with 3x serial ports and 2x ethernet port.
8800-309 Digital I/O board 2 Board without mA and RTD analog inputs
8800-995 DSfG boards DSfG to Modbus board. 8800-308D needed
8800-308G Dual Ethernet DSfG board As 8800-308 with one serial port internal for DSfG.
USB A-B cable USB A-B Cable
Replacement battery CR/BR2032
Optional Polymer coating for each of the electronics: Special coating to withstand moisture and
salty mist as need to comply with OIML D11 class H2
When boards are replaced it may be necessary to change the customised link and jumper set-
tings, further details on the position and function of all links and jumper settings are described
in section 3.3